盐城振得管件有限公司
Yan Cheng Zhen De Pipefittings Co., Ltd.
Yan Cheng Zhen De Pipefittings Co., Ltd.
您当前位置: 首页 > 锻制管件 |
 |
| 90°承插焊弯头 | 45°承插焊弯头 |
产品结构图：
 |
 |
| 90°承插焊弯头 | 45°承插焊弯头 |
承插焊弯头产品参数表：
| 公称通径 Nominal Diameter |
插孔深度 Depth of Socket |
承插孔直径 Dimension of Socket |
壁厚 Wall Thickness |
中心至承插孔底 Center to Bottom of Socket |
||||||||
| A | ||||||||||||
| Cmin | 90°承插焊弯头 90°Elbow |
45°承插焊弯头 45°Elbow |
||||||||||
| DN | NPS | Jmin | d1 | 3000LB Sch80 |
6000LB Sch160 |
9000LB XXS |
3000LB Sch80 |
6000LB Sch160 |
9000LB XXS |
3000LB Sch80 |
6000LB Sch160 |
9000LB XXS |
| 6 | 1/8" | 10 | 10.7 | 3.2 | 3.5 | - | 11 | 11 | - | 8 | 8 | - |
| 8 | 1/4" | 10 | 14.1 | 3.3 | 4.0 | - | 11 | 15 | - | 8 | 8 | - |
| 10 | 3/8" | 10 | 17.5 | 3.5 | 4.4 | - | 13 | 15 | - | 8 | 12 | - |
| 15 | 1/2" | 10 | 21.8 | 4.1 | 5.2 | 8.2 | 16 | 19 | 25 | 11 | 13 | 16 |
| 20 | 3/4" | 13 | 27.4 | 4.3 | 6.1 | 8.6 | 19 | 22 | 28 | 13 | 14 | 18 |
| 25 | 1" | 13 | 34.2 | 5.0 | 7.0 | 10.0 | 22 | 27 | 32 | 14 | 18 | 22 |
| 32 | 1.1/4" | 13 | 42.9 | 5.3 | 7.0 | 10.6 | 27 | 32 | 35 | 18 | 21 | 22 |
| 40 | 1.1/2" | 13 | 48.3 | 5.6 | 7.8 | 11.2 | 32 | 38 | 38 | 21 | 25 | 25 |
| 50 | 2" | 13 | 61.6 | 6.1 | 9.5 | 12.2 | 38 | 41 | 41 | 25 | 29 | 29 |
| 65 | 2.1/2" | 16 | 76.9/73.8 | 7.7 | 12.5 | - | 41 | 57 | - | 29 | 32 | - |
| 80 | 3" | 16 | 89.8 | 8.3 | 13.8 | - | 57 | 64 | - | 32 | 35 | - |
| 100 | 4" | 16 | 115.5 | 9.4 | - | - | 66 | - | - | 42 | - | - |
| 备注： 1: 每种规格的上下值分别代表最大、最小尺寸。 2: 承插壁厚外围平均值不低于所列值，最小值仅限于局部区域。 3: 上述承插焊弯头尺寸符合GB/T14383、GB/T14626、SH3410、HG/T21634、JIS B2316、ANSI B16.11、BS3799标准。 |
||||||||||||
承插焊弯头生产工艺流程：
| 尺寸/Size | 1/8″~4″ (DN6~DN100) |
| 压力等级/Class | 3000 LBS, 6000 LBS, 9000 LBS |
| 连接形式/Type | 承插焊, Sockeweld |
| 材质/Materal | 碳钢，不锈钢，合金钢，双相，镍合金，低温钢，铜镍 Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel |
| 表面处理/Surface Treatment | 热浸镀锌、环氧树脂和FBE涂层、电抛光、喷砂、焊接 Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Soldering |
| 制造工艺/Manufacturing process | Cutting, Heat treatment, Forging, Machining 下料锯切、热处理、模锻、冲切边、喷砂、机械加工 |
| 制造标准/Manufacturing Standards | ANSI B16.11, GB/T4383-2018，BS-3799 |
承插焊弯头生产用材料等级：
| 碳钢/Carbon Steel | 20#, Q235B, ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2 |
| 不锈钢/Stainless Steel | ASTM A182 F304, 304L, 316, 316L, 310S, 316Ti, 317L, 321 |
| 合金钢 /Alloy Steel | ASTM / ASME A 182, ASTM / ASME F5, F9, F11,F22, F 91 |
| 双相钢 /Duplex & Super Duplex Steel | ASTM A 182 – F51, F53, F55, S31803, S32205, S32550, S31254, SMO254, S32750, S32760, S32950. |
| 铜合金/Copper Alloy Steel | ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) |
| 镍合金 /Nickel Alloy | ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276) |
承插焊弯头产品尺寸数据表：
| Socket Weld Pressure Class | Pipe Schedule | ||||||||||||
| Class 3000 | SHC80/XH | ||||||||||||
| Class 6000 | SHC160 | ||||||||||||
| Class 9000 | XXH | ||||||||||||
| DN | Nom. Pipe Size |
Center to Bottom of Socket-A | Socket Bore Dia. B |
Bore Dia.Of Fitting D |
Socket Wall Thickness C | Body Wall Thickness G |
Depth of Socket Min. J |
||||||
| 90°Elbows Tees,Crosses |
45°Elbows | Class Designation | Class Designation | ||||||||||
| Class Designation | Class Designation | Class Designation | 3000 | 6000 | 3000 | 6000 | |||||||
| 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | Ave. | Ave. | Min. | Min. | ||||
| 6 | 1/8" | 11.0 | 11.0 | 8.0 | 8.0 | 10.8 | 6.9 | 4.0 | 3.18 | 3.96 | 2.41 | 3.15 | 9.5 |
| 8 | 1/4" | 11.0 | 13.5 | 8.0 | 8.0 | 14.2 | 9.3 | 6.4 | 3.78 | 4.60 | 3.02 | 3.68 | 9.5 |
| 10 | 3/8" | 13.5 | 15.5 | 8.0 | 11.0 | 17.6 | 12.6 | 9.2 | 4.01 | 5.03 | 3.20 | 4.01 | 9.5 |
| 15 | 1/2" | 15.5 | 19.0 | 11.0 | 12.5 | 21.8 | 15.8 | 11.8 | 4.67 | 5.97 | 3.73 | 4.78 | 9.5 |
| 20 | 3/4" | 19.0 | 22.5 | 13.0 | 14.0 | 27.2 | 21.0 | 15.6 | 4.90 | 6.96 | 3.91 | 5.56 | 12.5 |
| 25 | 1" | 22.5 | 27.0 | 14.0 | 17.5 | 33.9 | 26.7 | 20.7 | 5.69 | 7.92 | 4.55 | 6.35 | 12.5 |
| 32 | 1-1/4" | 27.0 | 32.0 | 17.5 | 20.5 | 42.7 | 35.1 | 29.5 | 6.07 | 7.92 | 4.85 | 6.35 | 12.5 |
| 40 | 1-1/2" | 32.0 | 38.0 | 20.5 | 25.5 | 48.8 | 40.9 | 34.0 | 6.35 | 8.92 | 5.08 | 7.14 | 12.5 |
| 50 | 2" | 41.0 | 54.0 | 25.5 | 28.5 | 61.2 | 52.5 | 42.9 | 6.93 | 10.92 | 5.54 | 8.74 | 16.0 |
| 65 | 2-1/2" | - | - | 28.5 | - | 73.9 | 62.7 | - | 8.76 | - | 7.01 | - | 16.0 |
| 80 | 3" | - | - | 32.0 | - | 89.8 | 78.0 | - | 9.52 | - | 7.62 | - | 16.0 |
| 100 | 4" | - | - | 41.0 | - | 115.2 | 102.3 | - | 10.69 | - | 8.56 | - | 16.0 |
1. Dimensions in Millimeters.
2. Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.
3. Upper and lower values for each size are the respective maximum and minimum dimensions.