盐城振得管件有限公司
Yan Cheng Zhen De Pipefittings Co., Ltd.
Yan Cheng Zhen De Pipefittings Co., Ltd.
您当前位置: 首页 > 锻制管件 |
 |
| 锻制异径插入件（Type 1） | 高压异径插入件（Type 2） |
产品结构图：
 |
 |
锻制异径插入件（Type 1） |
高压异径插入件（Type 2） |
异径插入件产品参数表：
| 公称通径 Nominal Diameter |
型式 Type |
承插孔径 Socket Bore Dia. |
插孔深度 Depth of Socket |
主体直径 Shank Dia. |
结构长度 LayingLength |
流通孔径 Bore Dia. of Fittings |
壁厚 Wall |
|||||
| DN | NPS | 3000LB | 6000LB | B | Kmin | SD | A | D | Cmin | |||
| 3000LB | 6000LB | 3000LB | 6000LB | 3000LB | 6000LB | |||||||
| 10*8 | 3/8*1/4 | 1 | 1 | 14.3 | 9.5 | 17.1 | 19.1 | 21.3 | 9.2 | 3.8 | 3.8 | 4.6 |
| 15*10 | 1/2*3/8 | 1 | 1 | 17.7 | 9.5 | 21.3 | 20.6 | 23.1 | 12.5 | 4.0 | 4.0 | 5.0 |
| 15*8 | 1/2*1/4 | 1 | 1 | 14.3 | 9.5 | 21.3 | 20.6 | 20.6 | 9.2 | 3.8 | 3.8 | 4.6 |
| 20*15 | 3/4*1/2 | 1 | 1 | 21.9 | 9.5 | 26.7 | 22.4 | 25.4 | 15.8 | 4.7 | 4.7 | 6.0 |
| 20*10 | 3/4*3/8 | 2 | 1 | 17.7 | 9.5 | 26.7 | 15.7 | 22.4 | 12.5 | 4.0 | 4.0 | 5.0 |
| 20*8 | 3/4*1/4 | 2 | 2 | 14.3 | 9.5 | 26.7 | 17.5 | 22.4 | 9.2 | 3.8 | 3.8 | 4.6 |
| 25*20 | 1*3/4 | 1 | 1 | 27.3 | 12.5 | 33.4 | 23.9 | 28.5 | 20.9 | 4.9 | 4.9 | 7.0 |
| 25*15 | 1*1/2 | 2 | 1 | 21.9 | 9.5 | 33.4 | 15.7 | 28.5 | 15.8 | 4.7 | 4.7 | 6.0 |
| 25*10 | 1*3/8 | 2 | 2 | 17.7 | 9.5 | 33.4 | 17.5 | 22.4 | 12.5 | 4.0 | 4.0 | 5.0 |
| 25*8 | 1*1/4 | 2 | 2 | 14.3 | 9.5 | 33.4 | 19.1 | 23.9 | 9.2 | 3.8 | 3.8 | 4.6 |
| 32*25 | 1.1/4*1 | 1 | 1 | 34.0 | 12.5 | 42.2 | 25.4 | 30.2 | 26.6 | 5.7 | 5.7 | 7.9 |
| 32*20 | 1.1/4*3/4 | 2 | 2 | 27.3 | 12.5 | 42.2 | 17.5 | 20.6 | 20.9 | 4.9 | 4.9 | 7.0 |
| 32*15 | 1.1/4*1/2 | 2 | 2 | 21.9 | 9.5 | 42.2 | 19.1 | 22.4 | 15.8 | 4.7 | 4.7 | 6.0. |
| 32*10 | 1.1/4*3/8 | 2 | 2 | 17.7 | 9.5 | 42.2 | 20.6 | 23.9 | 12.5 | 4.0 | 4.0 | 5.0 |
| 32*8 | 1.1/4*1/4 | 2 | 2 | 14.3 | 9.5 | 42.2 | 22.4 | 25.4 | 9.2 | 3.8 | 3.8 | 4.6 |
| 40*32 | 1.1/2*1.1/4 | 1 | 1 | 42.8 | 12.5 | 48.3 | 28.5 | 35.1 | 35.1 | 6.1 | 6.1 | 7.9 |
| 40*25 | 1.1/2*1 | 2 | 1 | 34.0 | 12.5 | 48.3 | 17.5 | 29.2 | 26.6 | 5.7 | 5.7 | 7.9 |
| 40*20 | 1.1/2*3/4 | 2 | 2 | 27.3 | 12.5 | 48.3 | 19.1 | 25.4 | 20.9 | 4.9 | 4.9 | 7.0 |
| 40*15 | 1.1/2*1/2 | 2 | 2 | 22.0 | 9.5 | 48.3 | 20.6 | 26.9 | 15.8 | 4.7 | 4.7 | 6.0 |
| 40*10 | 1.1/2*3/8 | 2 | 2 | 17.7 | 9.5 | 48.3 | 22.4 | 28.5 | 12.5 | 4.0 | 4.0 | 5.0 |
| 50*40 | 2*1.1/2 | 1 | 1 | 48.9 | 12.5 | 60.3 | 31.8 | 38.9 | 40.9 | 6.4 | 6.4 | 8.9 |
| 50*32 | 2*1.1/4 | 2 | 2 | 42.8 | 12.5 | 60.3 | 20.6 | 23.9 | 35.1 | 6.1 | 6.1 | 7.9 |
| 50*25 | 2*1 | 2 | 2 | 34.0 | 12.5 | 60.3 | 22.4 | 25.4 | 26.6 | 5.7 | 5.7 | 7.9 |
| 50*20 | 2*3/4 | 2 | 2 | 27.3 | 12.5 | 60.3 | 23.9 | 26.9 | 20.9 | 4.9 | 4.9 | 7.0 |
| 50*15 | 2*1/2 | 2 | 2 | 21.9 | 9.5 | 60.3 | 25.4 | 28.5 | 15.8 | 4.7 | 4.7 | 6.0 |
| 65*50 | 2.1/2*2 | 1 | 1 | 61.4 | 16.0 | 73.0 | 46.0 | 42.7 | 52.5 | 6.9 | 6.9 | 10.9 |
| 65*40 | 2.1/2*1.1/2 | 2 | 2 | 48.9 | 12.5 | 73.0 | 35.1 | 35.1 | 40.9 | 6.4 | 6.4 | 8.9 |
| 65*32 | 2.1/2*1.1/4 | 2 | 2 | 42.8 | 12.5 | 73.0 | 36.6 | 36.6 | 35.1 | 6.1 | 6.1 | 7.9 |
| 65*25 | 2.1/2*1 | 2 | 2 | 34.0 | 12.5 | 73.0 | 38.1 | 38.1 | 26.6 | 5.7 | 5.7 | 7.9 |
| 65*20 | 2.1/2*3/4 | 2 | 2 | 27.3 | 12.5 | 73.0 | 39.6 | 38.1 | 20.9 | 4.9 | 4.9 | 7.0 |
| 80*65 | 3*2.1/2 | 1 | 1 | 74.1 | 16.0 | 88.9 | 38.1 | 57.2 | 62.7 | 8.8 | 8.8 | 11.9 |
| 80*50 | 3*2 | 2 | 2 | 61.4 | 16.0 | 88.9 | 25.4 | 31.8 | 52.5 | 6.9 | 6.9 | 10.9 |
| 80*40 | 3*1.1/2 | 2 | 2 | 48.9 | 12.5 | 88.9 | 28.5 | 31.8 | 40.9 | 6.4 | 6.4 | 8.9 |
| 80*32 | 3*1.1/4 | 2 | 2 | 42.8 | 12.5 | 88.9 | 30.2 | 31.8 | 35.1 | 6.1 | 6.1 | 7.9 |
| 80*25 | 3*1 | 2 | 2 | 34.0 | 12.5 | 88.9 | 31.8 | 31.8 | 26.6 | 5.7 | 5.7 | 7.9 |
| 100*80 | 4*3 | 1 | 1 | 90.0 | 16.0 | 114.3 | 33.3 | 54.0 | 77.9 | 9.5 | 9.5 | 13.8 |
| 100*65 | 4*2.1/2 | 2 | 2 | 74.1 | 16.0 | 114.3 | 38.1 | 54.0 | 62.7 | 8.8 | 8.8 | 12.5 |
| 100*50 | 4*2 | 2 | 2 | 61.4 | 16.0 | 114.3 | 38.1 | 54.0 | 52.5 | 6.9 | 6.9 | 11.0 |
| 100*40 | 4*1.1/2 | 2 | 2 | 48.9 | 12.5 | 114.3 | 41.2 | 57.0 | 40.9 | 6.4 | 6.4 | 8.9 |
| 100*32 | 4*1.1/4 | 2 | 2 | 42.8 | 12.5 | 114.3 | 42.9 | 57.0 | 35.1 | 6.1 | 6.1 | 7.9 |
| 备注： 1: 每种规格的上下值分别代表最大、最小尺寸。 2: 承插壁厚外围平均值不低于所列值，最小值仅限于局部区域。 3: 上述异径插入件尺寸符合MSS SP-79标准。 |
||||||||||||
异径插入件生产工艺流程：
| 尺寸/Size | 1/8″~4″ (DN6~DN100) |
| 压力等级/Class | 2000 LBS, 3000 LBS, 6000 LBS |
| 连接形式/Type | Threads: American National Standard Taper Pipe Threads, NPT(ANSI/ASME B1.20.1-1983), Also available in other thread forms: Rc, Rp, BSP, BSPT,BSPP and in any combination. |
| 材质/Materal | 碳钢，不锈钢，合金钢，双相，镍合金，低温钢，铜镍 Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel |
| 表面处理/Surface Treatment | 热浸镀锌、环氧树脂和FBE涂层、电抛光、喷砂、焊接 Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Soldering |
| 制造工艺/Manufacturing process | Cutting, Heat treatment, Forging, Machining 下料锯切、热处理、模锻、冲切边、喷砂、机械加工 |
| 制造标准/Manufacturing Standards | MSS SP-79 |
异径插入件生产用材料等级：
| 碳钢/Carbon Steel | 20#, Q235B, ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2 |
| 不锈钢/Stainless Steel | ASTM A182 F304, 304L, 316, 316L, 310S, 316Ti, 317L, 321 |
| 合金钢 /Alloy Steel | ASTM / ASME A 182, ASTM / ASME F5, F9, F11,F22, F 91 |
| 双相钢 /Duplex & Super Duplex Steel | ASTM A 182 – F51, F53, F55, S31803, S32205, S32550, S31254, SMO254, S32750, S32760, S32950. |
| 铜合金/Copper Alloy Steel | ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) |
| 镍合金 /Nickel Alloy | ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276) |
异径插入件产品尺寸数据表：
| Nominal Diameter | Type | Socket Bore Dia. |
Depth of Socket |
Shank Dia. |
LayingLength | Bore Dia. of Fittings |
Wall | |||||
| DN | NPS | 3000LB | 6000LB | B | Kmin | SD | A | D | Cmin | |||
| 3000LB | 6000LB | 3000LB | 6000LB | 3000LB | 6000LB | |||||||
| 10*8 | 3/8*1/4 | 1 | 1 | 14.3 | 9.5 | 17.1 | 19.1 | 21.3 | 9.2 | 3.8 | 3.8 | 4.6 |
| 15*10 | 1/2*3/8 | 1 | 1 | 17.7 | 9.5 | 21.3 | 20.6 | 23.1 | 12.5 | 4.0 | 4.0 | 5.0 |
| 15*8 | 1/2*1/4 | 1 | 1 | 14.3 | 9.5 | 21.3 | 20.6 | 20.6 | 9.2 | 3.8 | 3.8 | 4.6 |
| 20*15 | 3/4*1/2 | 1 | 1 | 21.9 | 9.5 | 26.7 | 22.4 | 25.4 | 15.8 | 4.7 | 4.7 | 6.0 |
| 20*10 | 3/4*3/8 | 2 | 1 | 17.7 | 9.5 | 26.7 | 15.7 | 22.4 | 12.5 | 4.0 | 4.0 | 5.0 |
| 20*8 | 3/4*1/4 | 2 | 2 | 14.3 | 9.5 | 26.7 | 17.5 | 22.4 | 9.2 | 3.8 | 3.8 | 4.6 |
| 25*20 | 1*3/4 | 1 | 1 | 27.3 | 12.5 | 33.4 | 23.9 | 28.5 | 20.9 | 4.9 | 4.9 | 7.0 |
| 25*15 | 1*1/2 | 2 | 1 | 21.9 | 9.5 | 33.4 | 15.7 | 28.5 | 15.8 | 4.7 | 4.7 | 6.0 |
| 25*10 | 1*3/8 | 2 | 2 | 17.7 | 9.5 | 33.4 | 17.5 | 22.4 | 12.5 | 4.0 | 4.0 | 5.0 |
| 25*8 | 1*1/4 | 2 | 2 | 14.3 | 9.5 | 33.4 | 19.1 | 23.9 | 9.2 | 3.8 | 3.8 | 4.6 |
| 32*25 | 1.1/4*1 | 1 | 1 | 34.0 | 12.5 | 42.2 | 25.4 | 30.2 | 26.6 | 5.7 | 5.7 | 7.9 |
| 32*20 | 1.1/4*3/4 | 2 | 2 | 27.3 | 12.5 | 42.2 | 17.5 | 20.6 | 20.9 | 4.9 | 4.9 | 7.0 |
| 32*15 | 1.1/4*1/2 | 2 | 2 | 21.9 | 9.5 | 42.2 | 19.1 | 22.4 | 15.8 | 4.7 | 4.7 | 6.0. |
| 32*10 | 1.1/4*3/8 | 2 | 2 | 17.7 | 9.5 | 42.2 | 20.6 | 23.9 | 12.5 | 4.0 | 4.0 | 5.0 |
| 32*8 | 1.1/4*1/4 | 2 | 2 | 14.3 | 9.5 | 42.2 | 22.4 | 25.4 | 9.2 | 3.8 | 3.8 | 4.6 |
| 40*32 | 1.1/2*1.1/4 | 1 | 1 | 42.8 | 12.5 | 48.3 | 28.5 | 35.1 | 35.1 | 6.1 | 6.1 | 7.9 |
| 40*25 | 1.1/2*1 | 2 | 1 | 34.0 | 12.5 | 48.3 | 17.5 | 29.2 | 26.6 | 5.7 | 5.7 | 7.9 |
| 40*20 | 1.1/2*3/4 | 2 | 2 | 27.3 | 12.5 | 48.3 | 19.1 | 25.4 | 20.9 | 4.9 | 4.9 | 7.0 |
| 40*15 | 1.1/2*1/2 | 2 | 2 | 22.0 | 9.5 | 48.3 | 20.6 | 26.9 | 15.8 | 4.7 | 4.7 | 6.0 |
| 40*10 | 1.1/2*3/8 | 2 | 2 | 17.7 | 9.5 | 48.3 | 22.4 | 28.5 | 12.5 | 4.0 | 4.0 | 5.0 |
| 50*40 | 2*1.1/2 | 1 | 1 | 48.9 | 12.5 | 60.3 | 31.8 | 38.9 | 40.9 | 6.4 | 6.4 | 8.9 |
| 50*32 | 2*1.1/4 | 2 | 2 | 42.8 | 12.5 | 60.3 | 20.6 | 23.9 | 35.1 | 6.1 | 6.1 | 7.9 |
| 50*25 | 2*1 | 2 | 2 | 34.0 | 12.5 | 60.3 | 22.4 | 25.4 | 26.6 | 5.7 | 5.7 | 7.9 |
| 50*20 | 2*3/4 | 2 | 2 | 27.3 | 12.5 | 60.3 | 23.9 | 26.9 | 20.9 | 4.9 | 4.9 | 7.0 |
| 50*15 | 2*1/2 | 2 | 2 | 21.9 | 9.5 | 60.3 | 25.4 | 28.5 | 15.8 | 4.7 | 4.7 | 6.0 |
| 65*50 | 2.1/2*2 | 1 | 1 | 61.4 | 16.0 | 73.0 | 46.0 | 42.7 | 52.5 | 6.9 | 6.9 | 10.9 |
| 65*40 | 2.1/2*1.1/2 | 2 | 2 | 48.9 | 12.5 | 73.0 | 35.1 | 35.1 | 40.9 | 6.4 | 6.4 | 8.9 |
| 65*32 | 2.1/2*1.1/4 | 2 | 2 | 42.8 | 12.5 | 73.0 | 36.6 | 36.6 | 35.1 | 6.1 | 6.1 | 7.9 |
| 65*25 | 2.1/2*1 | 2 | 2 | 34.0 | 12.5 | 73.0 | 38.1 | 38.1 | 26.6 | 5.7 | 5.7 | 7.9 |
| 65*20 | 2.1/2*3/4 | 2 | 2 | 27.3 | 12.5 | 73.0 | 39.6 | 38.1 | 20.9 | 4.9 | 4.9 | 7.0 |
| 80*65 | 3*2.1/2 | 1 | 1 | 74.1 | 16.0 | 88.9 | 38.1 | 57.2 | 62.7 | 8.8 | 8.8 | 11.9 |
| 80*50 | 3*2 | 2 | 2 | 61.4 | 16.0 | 88.9 | 25.4 | 31.8 | 52.5 | 6.9 | 6.9 | 10.9 |
| 80*40 | 3*1.1/2 | 2 | 2 | 48.9 | 12.5 | 88.9 | 28.5 | 31.8 | 40.9 | 6.4 | 6.4 | 8.9 |
| 80*32 | 3*1.1/4 | 2 | 2 | 42.8 | 12.5 | 88.9 | 30.2 | 31.8 | 35.1 | 6.1 | 6.1 | 7.9 |
| 80*25 | 3*1 | 2 | 2 | 34.0 | 12.5 | 88.9 | 31.8 | 31.8 | 26.6 | 5.7 | 5.7 | 7.9 |
| 100*80 | 4*3 | 1 | 1 | 90.0 | 16.0 | 114.3 | 33.3 | 54.0 | 77.9 | 9.5 | 9.5 | 13.8 |
| 100*65 | 4*2.1/2 | 2 | 2 | 74.1 | 16.0 | 114.3 | 38.1 | 54.0 | 62.7 | 8.8 | 8.8 | 12.5 |
| 100*50 | 4*2 | 2 | 2 | 61.4 | 16.0 | 114.3 | 38.1 | 54.0 | 52.5 | 6.9 | 6.9 | 11.0 |
| 100*40 | 4*1.1/2 | 2 | 2 | 48.9 | 12.5 | 114.3 | 41.2 | 57.0 | 40.9 | 6.4 | 6.4 | 8.9 |
| 100*32 | 4*1.1/4 | 2 | 2 | 42.8 | 12.5 | 114.3 | 42.9 | 57.0 | 35.1 | 6.1 | 6.1 | 7.9 |
| Remarks： 1. Dimensions in Millimeters. 2. Dimensions refer to MSS SP-79. 3. Dimensions B is minimum length of perfect thread. The length of useful thread(B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for pipe threads(ANSI/ASME B1.20.1) 4. Dimensions of BSP and PTare available if required. 5. Dimensions may vary according to the customer's and manufacturer's requirement. |
||||||||||||